H&G Technology Co., LTD

  • banner

Handheld EMP Jammer Slot Machine Blocker

Handheld EMP Jammer Slot Machine Blocker 1
Handheld EMP Jammer Slot Machine Blocker 1
Handheld EMP Jammer Slot Machine Blocker 2
Product Name : Handheld EMP Jammer Slot Machine Blocker
Product ID : HAG-S322
The power supply voltage : 36 v
Working voltage : 36 v
Instrument power : 20 w
Working pattern : straight frequency 320 MHZ + mixed frequency can be adjusted
Size : 85 x50x21mm
Directions

Handheld EMP Jammer Slot Machine Blocker

Product introduction:

The power supply voltage: 36 v

Working voltage: 36 v

Working pattern: straight frequency 320 MHZ + mixed frequency can be adjusted

Antenna pattern: built-in + strengthen external (removable)

Instrument color: black

Size: 85 x50x21mm

Instrument power: 20 w

Power switch: double open the switch

Cooling modes: internal heat sink

Trial version: single pokies, attachment slot machines, roulette machine, COINS, paper money, lottery, electronic currency card reader,

 

Work process:

1, through the IC chip + of transistor pulse oscillation circuit to shock the power (36 v), processing to more appropriate frequency

2, through a dedicated RF transistor to signal after finishing of high frequency amplifier, 

and then through the high frequency coil again signal sorting output RF signal pulse high magnetic field

 Handheld EMP Jammer Slot Machine Blocker 1.jpg

Working on separator principle: game consoles and separator can emit high frequency electromagnetic wave, 

the console control chip on the motherboard have points, with game consoles can interfere with the game board,

coin, key points, high frequency magnetic field signal can penetrate the inside of the machine wire, resistor,

capacitor, chip, IC, transistor, SCM, etc., after the interference on the points on the integrated circuit receives

signals or refund money, the machine will automatically on or refund COINS, electric equipment is

made up of thousands of electronic components, electrical engineer is the most headache is electromagnetic interference,

especially in high frequency, ultra high frequency electromagnetic interference, the problem is now and in the future is difficult to conquer.


Instrument characteristics: 

This machine adopt two frequency independent switch design, 

direct frequency suitable for small slot machine work, pulse is suitable for large consoles, a clear division of responsibilities, using range is wide.


Instrument power supply:

Points 1, 3 hole hole charge note: special charger, each hole charge for 20 minutes

2, with nine series of A lithium battery (voltage is 36 v), the capacity of the larger, more durable

3, battery terminal USES the self-recovery fuse, higher safety performance

4, the charger current 350 ma, the biggest battery faster

 

Launch:

1, enameled wire coil is made of high quality, precision round, more standard and more stable

2, imported high power transistor (function stronger)

3, the latest debug method, power is more powerful


Manual:

1. Charge jammer for 20 mins per hole, total 1 hour

2. Put antenna on

3. Take the “power switch” on  (only one white switch) and

4. Put jammer near the coin or bill acceptor

5. Press the green emitter switch

6. Choose the frequency by press the gear selection for different machine

7. Take the “power switch” on (NO.1 and 2)

8. Put jammer near the coin or bill acceptor

9. Press the black emitter switch

10. Choose the frequency by press the gear selection for different machine

notice: do not press the green and black swith the same time!!!


Video: https://www.youtube.com/watch?v=YKZDqXOajqI

https://www.youtube.com/watch?v=ZqdmXL6xrtg

https://www.youtube.com/watch?v=6UFx3C2FZhM 



Inquiry
If you need any information before purchase, you can click our online service, If it is not availabl
Title:
 
Your name:
 *
Email:
 *
Telephone:
 
Message:
 *
Code:
   *
     Items marked with * have to be filled in